The most common use of pressure washers is to wash the car. However, although it may seem an easy task, there are many things to take into account to do it correctly and not damage the paint. In this opportunity, we will share the 4 steps to wash the car with a pressure washer.
Washing the car with a pressure washer not only keeps the car clean but also keeps the paint in top condition. This will be possible by using washing methods that remove dirt and using techniques that do not damage the quality of the paint.
Using a bucket and sponge is a thing of the past thanks to tools such as pressure washers, which not only do a more precise job of cleaning but also save time and water.
Pressure washing is a technique that has been used for a long time, not only at the domestic level but also in car washes and at the industrial level, for heavy machinery or cargo vehicles.
By using a pressure washer to wash the car, it is possible to reach the most difficult corners of the vehicle, which cannot be reached with traditional washing methods.
Thanks to the water pressure it is possible to do a much deeper cleaning and remove all the dirt particles that accumulate in the car.
Everyone thinks that washing the car is a piece of cake, but when it comes to using machines like these is another experience, so we share the 4 steps to wash the car with a pressure washer.
1. Spraying the car with water
The ideal way to wash the car with a pressure washer is to spray the water all over the car to remove the dirt more easily. The idea is to do it from top to bottom so that all the dust removed falls to the floor by gravity.
For this, it is not necessary to use a high-pressure nozzle, because this step consists of removing the dirt that is not so adhered to the paint or the surface of the car.
2. Apply a layer of soap
In this step, it is recommended to use the foam nozzle and use the same technique as the first step, which consists of applying the soap from top to bottom covering the entire car.
After that, it is recommended not to wait more than 5 minutes, because once it dries, it may be more difficult to remove it. The soap will do its job of loosening the dirt.
3. Removing stains
To remove stains, it will be necessary to use a nozzle with higher water pressure. Choosing the right nozzle is critical because too much water pressure can remove the paint.
It is necessary to make sure to use a nozzle that provides the level of water pressure according to the type of stain you have. The more the stain is stuck, the more pressure you will need to apply.
4. Remove the soap and dry
Finishing washing the car with the pressure washer involves applying step one again, with low pressure to remove excess soap. For this, you will probably need to change the nozzle with lower pressure.
There is no specific way to wash the car with a pressure washer, however, following these steps will surely make this task much easier and more practical.
